Omnimount - 30.0 WB

Below are all the different types of Omnimount. Select the device of your choice, to download the manual

Contents

Do not permit the ball shaft to rest upon or push against the clamp assembly There should be no contact between the ball shaft and the clamp assembly components during the tightening procedure Be sure to support the weight of the speaker Do not permit the speaker to hang from the clamp assembly while you re tighleninq the tension screw Be sure the clamp assembly Is oriented in the proper direction as indicated on the template in step 1 2 4 1 Check again that the clamp assembly is open enough to clear the ball Get the 1 4 alien hex wrench Have your assistant litt the speaker into position and pop the clamp assembly onto the ball While your assistant supports the weight of the speaker insert the long end of the hex key See Fig 9 Turn the hex ten ...